This is a freelance design, intended as a fuelling depot for a Narrow Gauge, or maybe an Industrial setting.
It features a fuel tank mounted on brick pillars and accessed by a ladder, themselves on a brick platform. The top of the tank features detailed handwheels and valves. The walkways themselves feature a repeated pattern that is calling out to be picked out by a skilful painter.
Alongside the tank, is a fuel pump, under a shelter made of corrugated iron. I’ve made this as thin as possible (it’s about 1/3 mm thick). There’s a fire extinguisher behind the pump and it’s accessed by a steel set of steps.
Overall this is a highly detailed model, and would reward careful painting and weathering. It’s made of 3d printed resin and I’d recommend you use acrylic primer and paints to finish it.
In terms of dimensions, it’s 97mm across, 60mm high and 28mm deep.
This is a freelance design, intended as a fuelling depot for a Narrow Gauge, or maybe an Industrial setting.
It features a fuel tank mounted on brick pillars and accessed by a ladder, themselves on a brick platform. The top of the tank features detailed handwheels and valves. The walkways themselves feature a repeated pattern that is calling out to be picked out by a skilful painter.
Alongside the tank, is a fuel pump, under a shelter made of corrugated iron. I’ve made this as thin as possible (it’s about 1/3 mm thick). There’s a fire extinguisher behind the pump and it’s accessed by a steel set of steps.
Overall this is a highly detailed model, and would reward careful painting and weathering. It’s made of 3d printed resin and I’d recommend you use acrylic primer and paints to finish it.
In terms of dimensions, it’s 97mm across, 60mm high and 28mm deep.
