Skip to content

STL downloads / Model railway designs

Model railway
STL downloads.

Printable MH Modelworks designs are being made available for personal use through Cults3D. I no longer sell models directly, but the designs have not disappeared.

See available STL files Physical models at Enwins

22

models currently available as Cults3D downloads.

Use: Personal
Format: STL
Source: Cults3D

Where to get them

Two routes,
one workshop.

01

Download the STL files

If you print your own models, use the Cults3D links below. More files are being prepared and uploaded over time.

See available downloads

02

Buy physical models

Ready-made physical models are available through Enwins Models rather than directly from MH Modelworks.

Visit Enwins Models

Available STL downloads

22 model families

01

Bus Stop

4mm, 7mm, TT120 scales available to download from Cults3D as a set of STLs.

4mm, 7mm, TT120

Front view of the printed dressed stone bus stop with a slate roof, stone gable and open front divided by a central column.

Angled view of the printed bus stop showing the stone side wall with a narrow window, slate roof and open front.

Rear three-quarter view of the printed bus stop showing the solid dressed stone back and side walls under the slate roof.

Close-up of the printed bus stop entrance showing the central column, stone texture and bench inside the shelter.

02

Charles

7mm scale available to download from Cults3D as a set of STLs.

Charles painted in red and black with a brass dome and number 5, running on a narrow gauge layout beside a rock cutting.

Side view of the unpainted printed Charles body on its chassis, showing the saddle tank, dome, chimney and open-backed cab.

Front three-quarter view of the unpainted printed Charles showing the smokebox door, buffer beam and cab spectacle plates.

Rear three-quarter view of the unpainted printed Charles showing the cab back with round spectacle windows and rivet detail.

Painted Charles on a narrow gauge layout, seen past a stacked sleeper water tower base with barrels and crates on the ground.

03

Fuelling Station

4mm, 7mm scales available to download from Cults3D as a set of STLs.

Three-quarter view of the diesel fuelling station model with raised tank and brick supports

Opposite three-quarter view of the diesel fuelling station model showing the corrugated shelter and steps

Side view of the diesel fuelling station model showing the tank, stone base, and cross bracing

Close-up of the diesel fuelling station model showing the pump, railings, ladder, and platform texture

Close-up of the tank top fittings and hand wheels on the diesel fuelling station model

04

Hoist

4mm, 7mm scales available to download from Cults3D as a set of STLs.

Painted timber A-frame hoist straddling narrow gauge track on a layout, with a chain block lifting over a red and black locomotive.

Painted hoist against a stone shed wall, its chain block hanging over a red and black locomotive with two axle jacks beside the track.

Unpainted print of the hoist assembled on its track base, showing the braced A-frames, pulley block and an axle jack.

Painted hoist standing over the shed road beside a stone workshop, with axle jacks on the ballast.

Printed hoist parts laid out flat: two A-frames, the track base, cross braces, pulley block and axle jacks.

05

Hut

4mm, 7mm scales available to download from Cults3D as a set of STLs.

Front elevation of the printed stone lineside hut with central door, two windows, slate roof and chimney.

Three-quarter front view of the printed stone lineside hut showing the slate roof, chimney, door and window details.

Angled side and front view of the printed stone lineside hut showing the wall texture, door, windows and chimney.

06

Large Crane

4mm, 7mm scales available to download from Cults3D as a set of STLs.

Full view of the printed wharfside crane with long jib, rigging, hook and winding wheels.

Close-up of the printed wharfside crane winding mechanism showing gears, hand crank and circular base.

Side view of the printed wharfside crane showing the tall jib, pulley, base and gear assembly.

07

Loco Shed

4mm scale available to download from Cults3D as a set of STLs.

Three-quarter view of the 009 slate loco shed with a narrow gauge locomotive coming out of the arched entrance

Gable end of the 009 loco shed with both strap-hinged doors open and a locomotive inside

Side view of the 009 loco shed showing the slate roof, chimney, arched windows and small side door

View through the stone arch of the 009 loco shed to the workshop forge and bench inside

Three-quarter view of the 009 loco shed with the arched doors closed

08

Mainline Water Tower

4mm, 7mm, TT120 scales available to download from Cults3D as a set of STLs.

4mm, 7mm, TT120

Unpainted print of the mainline water tower with its riveted tank, lid, filler arm and ladder, and the heater standing at the foot of the column.

Side view of the printed water tower with the filler arm swung out, the ladder clipped to the tank and the heater flue running up the column.

Render of the water tower fitted with the conical GWR lid, showing the riveted tank, filler arm, ladder and heater on the chequer-plate base.

Render of the water tower from the ladder side, fitted with the shallower generic lid and its valve linkage.

09

Narrow Gauge Water Tower

4mm scale available to download from Cults3D as a set of STLs.

Two printed narrow gauge water towers side by side, one on a stacked sleeper base and one on a stone base, each topped with a panelled tank and filler pipe.

10

O16.5 Starter Pack

7mm scale available to download from Cults3D as a set of STLs.

Three printed four-wheel coaches part-painted in dark blue with red panels and cream lining, waiting on the workbench beside a bottle of airbrush thinner.

Weathered printed saddle tank locomotive in red-brown on O16.5 track, with tall chimney, open cab and spectacle plate.

Weathered grey printed open wagon with railed sides, brake lever and plank floor, fitted with a coupling at one end.

Unpainted grey resin print of the saddle tank locomotive body sitting on its chassis, showing the tank, chimney and cab.

Blender render of the four-wheel coach showing the curved roof, planked end, panelled side with droplight windows and door handle.

11

Privy

4mm, 7mm scales available to download from Cults3D as a set of STLs.

Printed plank-built privy with a sloping roof and its door standing open on strap hinges.

Three-quarter view of the printed privy with its plank walls and the door standing open.

Printed privy from the hinge side, showing the ledged and braced door closed against the plank walls.

Side view of the printed privy showing the vertical plank walls, sloping roof and open door.

Printed privy seen from above, showing the boarded roof and the open doorway.

12

Ruined Cottage

4mm, 7mm scales available to download from Cults3D as a set of STLs.

Three-quarter view of the ruined cottage model showing collapsed roof timbers and stone wall detail

High angle view into the ruined cottage model showing hollow stone walls and broken roof structure

Side view of the ruined cottage model showing irregular stone courses and broken wall tops

Low side view of the ruined cottage model showing the footprint, doorway, and stonework texture

Angled exterior view of the ruined cottage model showing broken walls and collapsed roof beams

13

Sheepfold

4mm, 7mm, TT120 scales available to download from Cults3D as a set of STLs.

4mm, 7mm, TT120

Blender render of the sheepfold model showing a dry stone barn with a slate roof, a lean-to with a corrugated roof and a low stone pen.

14

Signal Box

4mm, 7mm scales available to download from Cults3D as a set of STLs.

Unpainted printed signal box showing the stone base, multi-pane windows, slate roof and timber-clad entrance with steps

Render of the signal box model with a stone base, large multi-pane windows, a slate roof and a timber-clad end with a door.

Render of the signal box interior floor with a lever frame, a stove and its chimney pipe.

15

Single Fairlie

4mm scale available to download from Cults3D as a set of STLs.

Three-quarter view of the printed Single Fairlie locomotive body showing the smokebox, dome, side tanks and cab.

Front view of the printed Single Fairlie showing the smokebox door, chimney, dome and front sand boxes.

16

Single Storey Workshop

4mm scale available to download from Cults3D as a set of STLs.

Three-quarter view of the printed single storey stone workshop with a slate roof, louvred ridge ventilator, sliding door and three arched windows.

Front view of the printed workshop with its sliding door pulled back along the rail to show the open doorway.

Rear of the printed workshop showing a row of eight arched windows with glazing bars set in the stone wall.

Close-up of the printed sliding door with its glazed top panel, plank boarding, wicket door and overhead rail.

Close-up of the louvred ventilator with its pointed cap sitting on the slate roof ridge.

17

Small Crane

4mm, 7mm, TT120 scales available to download from Cults3D as a set of STLs.

4mm, 7mm, TT120

Freelance small crane model posed in a stone quarry scene with track and workshop detail

Unpainted grey resin print of the small crane standing upright, showing the jib, tie bars, post and winding gears.

Freshly printed small crane lying on a cutting mat with its print supports still attached beneath the jib and gears.

18

Small Loco Shed

4mm scale available to download from Cults3D as a set of STLs.

Painted smaller 009 stone loco shed with green doors open beneath the arched entrance

Side of the painted smaller loco shed showing the slate roof, window and green side door

Rear three-quarter view of the painted smaller loco shed showing its stone walls and slate roof

Unpainted smaller loco shed with both plank doors closed beneath the round gable ventilator

Unpainted smaller 009 loco shed with a narrow gauge locomotive at the open entrance

19

Tractor Loco

4mm scale available to download from Cults3D as a set of STLs.

Rear three-quarter view of the printed tractor loco showing the curved cab roof, rear platform and stored equipment.

Front view of the printed tractor loco showing the bonnet, cab windows, front platform and coupling.

Front and side three-quarter view of the printed tractor loco showing the cab side, bonnet and underframe detail.

Front three-quarter view of the printed tractor loco with cab, bonnet, front platform and visible coupling.

20

Waiting Room

4mm, 7mm, TT120 scales available to download from Cults3D as a set of STLs.

4mm, 7mm, TT120

Three-quarter view of the printed stone waiting room with slate roof, chimney, window and open shelter bay.

Rear and side view of the printed waiting room showing the stone wall texture and chimney.

Close-up of the waiting room shelter interior showing the bench and stonework detail.

Close-up of the waiting room fireplace and interior stonework visible through the open front.

21

Water Tower & Coaling Stage

4mm, 7mm scales available to download from Cults3D as a set of STLs.

Front view of the printed water tower and coaling stage with stone base, plank coal bays and tank detail.

Angled view of the printed water tower and coaling stage showing the coal bays, stone tower and pipework.

Rear and side view of the printed water tower and coaling stage showing stone steps, tank pipework and coal bay walls.

Tank-side three-quarter view of the printed water tower and coaling stage with stonework, pipe and coal bays.

22

Welshpool and Llanfair / GWR / Cambrian Earl & Countess

4mm scale available to download from Cults3D as a set of STLs.

Unpainted GWR Earl locomotive print shown from the front with cab, boiler and side tank detail.

Painted green and black GWR Earl locomotive model shown from the front and side.

Unpainted GWR Earl locomotive print shown on a wooden surface from above and front.

Painted green and black GWR Earl locomotive model shown side-on over the display base.

Close front three-quarter view of an unpainted GWR Earl locomotive print showing rivets and boiler front detail.

Looking for another design?

Ask me to upload it first.

I’m working to make all of my STL files available for personal use via Cults3D. If there is a particular model you would like to see in the meantime, email me and I’ll prioritise that upload.

Request an STL upload